Continuous wave: Difference between revisions

From Ameliapedia
Jump to navigation Jump to search
No edit summary
No edit summary
Line 7: Line 7:
"In common usage and practice, C-W designates radiotelegraphy transmission using an unmodulated R-F carrier wave, turned on and off with a telegraph key to form the dits and dahs of Morse code. The 13-series transmitters were originally designed for voice operation only. The one aboard NR16020 was modified for C-W operation, primarily because of the requirement to operate on 500 KHz. This involved two major changes: alteration to the control circuitry; and the addition of a keying relay."
"In common usage and practice, C-W designates radiotelegraphy transmission using an unmodulated R-F carrier wave, turned on and off with a telegraph key to form the dits and dahs of Morse code. The 13-series transmitters were originally designed for voice operation only. The one aboard NR16020 was modified for C-W operation, primarily because of the requirement to operate on 500 KHz. This involved two major changes: alteration to the control circuitry; and the addition of a keying relay."


 
{| border=1 cellpadding=5
|+'''Classification of transmission modes'''
|-
|A1
|'''Continuous wave (CW)'''
|-
|A2
|[[Modified continuous wave]] (MCW)
|-
|A3
|radiotelephone; voice
|}
== Related articles ==
== Related articles ==



Revision as of 04:10, 24 February 2009

Abbreviated "CW" or "C-W".

"A continuous wave or continuous waveform (CW) is an electromagnetic wave of constant amplitude and frequency. ... Continuous-wave radio was called radiotelegraphy because like the telegraph, it worked by means of a simple switch to transmit Morse code. However, instead of controlling the electricity in a cross-country wire, the switch controlled the power sent to a radio transmitter. This mode is still in common use by amateur radio operators."[1]

In the discussion of the final flight, references to CW effectively mean "Morse code communications."

"In common usage and practice, C-W designates radiotelegraphy transmission using an unmodulated R-F carrier wave, turned on and off with a telegraph key to form the dits and dahs of Morse code. The 13-series transmitters were originally designed for voice operation only. The one aboard NR16020 was modified for C-W operation, primarily because of the requirement to operate on 500 KHz. This involved two major changes: alteration to the control circuitry; and the addition of a keying relay."

Classification of transmission modes
A1 Continuous wave (CW)
A2 Modified continuous wave (MCW)
A3 radiotelephone; voice

Related articles