Remnants of riveted can: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Most of these images depict tiny fragments of highly oxidized ferrous metal recovered in 2007 from the SL-Fire Feature at the Seven Site, Nikumaroro. A small proportion were found in a discrete rectangular concentration about 40 cm. on a side, suggesting a can or metal box of approximately those dimensions. Many of the fragments contain rivets or pins of some kind, often near finished edges. The metal is very thin (ca. 1 mm. or less) and is laminated. Several straight edges have been found, along with a couple of square corners and right-angle bends. Some edges may have been finished by being wrapped over and around pieces of straight wire, a number of fragments of which were recovered. | |||
<div align="center"> | <div align="center"> | ||
<gallery> | <gallery> | ||
Image:Rods_wires.jpg | Image:Rods_wires.jpg|Caption here | ||
Image:Rivets.jpg | Image:Rivets.jpg|Caption here | ||
Image:Thin_typical.jpg | Image:Thin_typical.jpg|Caption here | ||
Image:Turned_edge_1.jpg | Image:Turned_edge_1.jpg|Caption here | ||
Image:Turned_edge_2.jpg | Image:Turned_edge_2.jpg|Caption here | ||
Image:SL3Corner_markup_2.jpg | Image:SL3Corner_markup_2.jpg|Caption here | ||
Image:Corner_with_rivet_1.jpg | Image:Corner_with_rivet_1.jpg|Caption here | ||
Image:X_section.jpg | Image:X_section.jpg|Caption here | ||
Image:crosssection.jpg | Image:crosssection.jpg|Caption here | ||
Image:Sardinecan.jpg | Image:Sardinecan.jpg|Caption here | ||
</gallery> | </gallery> | ||
</div> | </div> | ||
[[Category:artifacts]] | [[Category:artifacts]] | ||
Revision as of 00:37, 24 July 2009
Most of these images depict tiny fragments of highly oxidized ferrous metal recovered in 2007 from the SL-Fire Feature at the Seven Site, Nikumaroro. A small proportion were found in a discrete rectangular concentration about 40 cm. on a side, suggesting a can or metal box of approximately those dimensions. Many of the fragments contain rivets or pins of some kind, often near finished edges. The metal is very thin (ca. 1 mm. or less) and is laminated. Several straight edges have been found, along with a couple of square corners and right-angle bends. Some edges may have been finished by being wrapped over and around pieces of straight wire, a number of fragments of which were recovered.