Talk:Remnants of riveted can: Difference between revisions

Latest revision as of 00:45, 24 July 2009

Leave a note for the author telling him or her what we think of their article: FABULOUS!

Revision as of 00:02, 24 July 2009 (view source) Tfking106 (talk \| contribs) (New page: Most of these images depict tiny fragments of highly oxidized ferrous metal recovered in 2007 from the SL-Fire Feature at the Seven Site, Nikumaroro. A small proportion were found in a di...)		Latest revision as of 00:45, 24 July 2009 (view source) Moleski (talk \| contribs) No edit summary
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
	Most of these images depict tiny fragments of highly oxidized ferrous metal recovered in 2007 from the SL-Fire Feature at the Seven Site, Nikumaroro. A small proportion were found in a discrete rectangular concentration about 40 cm. on a side, suggesting a ~~can or metal box of approximately those dimensions. Many of~~ the ~~fragments contain rivets or pins of some kind, often near finished edges. The metal is very thin (ca. 1 mm.~~ or less) and is laminated. Several straight edges have been found, along with a couple of square corners and right-angle bends. Some edges may have been finished by being wrapped over and around pieces of straight wire, a number of fragments of ~~which were recovered.~~		Leave a note for the author telling him or her what we think of their article: FABULOUS!